saw components saw filter for smallcells band i uplink series/type: ordering code: b9610 B39202B9610P810 date: version: april 14, 2014 2.0 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 april 14, 2014 b9610 1950.00 mhz please read cautions and warnings and important notes at the end of this document. saw components saw filter for smallcells data sheet application n low-loss rf filter for smallcells n usable passband 60 mhz n no matching network required for operation at 50 w n unbalanced to unbalanced operation features n package size 1.4 x 1.1 mm 2 n max package height 0.4 mm n package code qcs5p n rohs compatible n approximate weight 0.003 g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitivity l evel 3 0.325 0.4 0.575 1 5 4 3 2 0.25 1.1 0.5 0.5 1.4 bottom view side view top view pin configuration n 1 input n 4 output n 2,3,5 to be grounded
3 april 14, 2014 b9610 1950.00 mhz saw components saw filter for smallcells data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C10 ?c to +85 ?c terminating source impedance: z s = 50 w terminating load impedance: z l = 50 w min. typ. @ 25 ?c max. center frequency f c 1950.00 mhz maximum insertion attenuation 1920.0 ... 1980.0 mhz a max 2.0 3.0 db amplitude ripple (p-p) 1920.0 ... 1980.0 mhz da 1.0 1.8 db vswr 1920.0 ... 1980.0 mhz 1.8 2.2 error vector magnitude @f carrier 1922.4 ... 1977.6 mhz evm 1) 1) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 2.3 3.0 % attenuation a 50.0 ... 960.0 mhz 27 35 db 960.0 ... 1575.0 mhz 25 34 db 1575.0 ... 1576.0 mhz 32 36 db 1576.0 ... 1730.0 mhz 30 36 db 1730.0 ... 1880.0 mhz 30 38 db 2025.0 ... 2050.0 mhz 35 55 db 2110.0 ... 2170.0 mhz 35 40 db 2200.0 ... 3100.0 mhz 33 39 db 3100.0 ... 3960.0 mhz 30 45 db 3960.0 ... 6000.0 mhz 20 30 db
4 april 14, 2014 b9610 1950.00 mhz please read cautions and warnings and important notes at the end of this document. saw components saw filter for smallcells data sheet maximum ratings operable temperature range t C40/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 0 v esd voltage v esd 50 1) 1) acc. to jesd22-a115b (machine model), +/- 10 pulses. v machine model, 10 pulses input power at 1920.0 ... 1980.0 mhz p in 10 dbm cw, 100000 hrs @ 85deg
5 april 14, 2014 b9610 1950.00 mhz saw components saw filter for smallcells data sheet please read cautions and warnings and important notes at the end of this document. transfer function (narrowband) transfer function (wideband)
6 april 14, 2014 b9610 1950.00 mhz please read cautions and warnings and important notes at the end of this document. saw components saw filter for smallcells data sheet smith charts s 11 function s 22 function
7 april 14, 2014 b9610 1950.00 mhz saw components saw filter for smallcells data sheet please read cautions and warnings and important notes at the end of this document. references type b9610 ordering code B39202B9610P810 marking and package c61157-a8-a9 packaging f61074-v8237-z000 date codes l_1126 s-parameters b9610_nb.s2p, b9610_wb.s2p see file header for port/pin assignment table. soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the- council of june 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("directive") with due regard to the application of exemptions as per annex iii of the directive in certain cases. moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2014. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
8 april 14, 2014 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
